SANGOMA A200: 2-24 Port Expandable Analog Voice Card
The A200 Series of Analog Voice Cards deliver superior audio quality in a compact 2U card that expands from two to twenty-four ports using a single interface slot.
To reach this configuration, simply add additional Remora™ cards to any base card in the A200 Series. A single PCI or PCI Express slot hosts the connection and ensures common synchronous clocking for all channels.
Sangoma cards guarantee error-free faxing and click-free audio on analog-digital links.
Technical Specifications
From 2 to 24 ports supported, mixing FXO and FXS interfaces, as required
Support for the Asterisk®, FreeSWITCH®, Yate™, CallWeaver™, PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications
Single synchronous PCI and PCI Express interface for all 24 FXO/FXS ports
Four RJ11 ports per Remora™ card
Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis
Short 2U compatible mounting clips available for installation in 2U rack-mount servers
32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention
Autosense compatibility with 5 V and 3.3 V PCI busses
Fully PCI 2.2 and PCI Express compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts
Shipped with standard RJ11-terminated cables
Get the Fax on Sangoma Hardware
With Sangoma, there is no need for a separate analog line to run your fax machine
Using T1/E1 passthrough with Sangoma analog cards, there are no clock slips, buffer overruns, or transmit underruns that cause missed lines, blank sheets, and missed pages when faxing
Sangoma A200 and A400 cards synchronize perfectly with digital T1/E1 cards and the PSTN atomic clock for error-free fax and modem passthrough and superior voice quality over T1 and E1 lines
FXO portsFrom 2 to 24 ports, mixing FXO and FXS supported.
FXS portsFrom 2 to 24 ports, mixing FXO and FXS supported.
Hardware Echo cancelationNO TIENE - NO PUEDE AÑADIRSE CON MODULOS
Slot typePCI Express: 2.64 W (0.8 A @ 3.3 V) + 4.2 W (0.35 A @ 12 V) per FXS module
Compatible modulesMódulo A200O (FXO-2 supports two FXO lines) | Módulo A200S (FXS-2 supports two FXS lines)