The SIP Loudspeaker Amplifier is a PoWer-over-1ethernet (802.3at)Voice-over-Internet-Protocol (voIP) paging device and loud ringer for use in places that need loud paging. It provides an easy method for implementing an IP-based overhead paging system for your existing or new VoIP Phone System.
The SIP Loudspeaker Amplifier can have on or two 011471 IP66 analog Horns attached.
CyberData has maintained one of the most comprehensive lists of IP PBX servers certified to work with CyberData VoIP Products.
Concurrent SIP and multicast paging
Loud/night ringer function - second SIP extension
Paging prioritization
Support for 10 multicast groups
9 user-uploadable page messages
Can receive pages directly from Poly phones as well as other devices that can send standard multicast
Sense input capable for generating events or SIP calls
Supports delayed pages with call buffering
Support for security code to prevent unwanted SIP calls
Support for auxiliary strobe
Line-in for background music
Line-out connector
DMTF controlled relay
Supports up to two 011471 IP66 Analog Horns or other 8 Ohm speaker
Network and manual volume control
Autoprovisioning via HTTPS, HTTP, TFTP
HTTPS or HTTP web based configuration. HTTPS is enabled by default
Configurable event generation for device health and status monitoring
TLS 1.2 enhanced security for IP endpoints in a local or cloud-based environment
802.11q VLAN tagging
HTTP command interface
Support for Cisco SRST resiliency
SIPSIP RFC 3261
Relay numberDTMF controlled relay
PoE802.3at or 802.3af
Additional featuresAudio output: 802.3at - SPL 117dB @ 1m (When used with the 011068 Mini Horn)